Molykote M-77 Paste Original Genuine Can 500g Lubrication Grease for Plastic Metal Moderate Load Low Speed Anti Seize Solid Lubricant Bearing Extreme Temperature Water Resistance Black Dow Corning Original Product

About MOLYKOTE® M-77 Paste

OVERVIEW:

MOLYKOTE® M-77 Paste is a specialty lubricating paste formulated with a silicone oil base and solid lubricants, including molybdenum disulfide (MoS₂) and graphite. It is designed for metal/metal combinations and some metal/plastic combinations operating under extreme loads and very slow speeds. M-77 Paste provides excellent wear protection, prevents stick-slip, and ensures reliable performance over a wide temperature range, making it ideal for automotive, aerospace, and general industrial applications.

KEY FEATURES:

High Load-Carrying Capacity
Provides reliable wear protection and extreme-pressure (EP) performance under high mechanical loads and static pressures.

Wide Operating Temperature Range
Performs effectively from approximately -50°C to +230°C, with solid lubricants effective up to +450°C.

Prevents Stick-Slip and Galling
Forms a durable solid lubricating film that helps prevent stick-slip motion, seizure, and fretting corrosion.

Excellent Lubricity at Very Low Speeds
Provides effective lubrication under conditions of extremely slow speeds or oscillating movements.

Compatible with Many Plastics and Elastomers
Offers good compatibility with various plastics and elastomers (testing recommended), making it suitable for mixed material assemblies.

APPLICATIONS:

• Automotive Components – Lubrication of brake system parts, steering linkages, seat adjusters, sunroof mechanisms, and chassis components.

• Aerospace Assemblies – Used in aircraft components requiring solid lubricant protection under high loads and varying temperatures.

• Assembly of Press-Fit Parts – Facilitates assembly and prevents fretting in press-fit connections.

• Slow-Speed Bearings and Slides – Provides lubrication in applications with extremely low speeds and oscillating motions.

• General Industrial Maintenance – Ideal for sliding surfaces, threaded fasteners, and other components where long-lasting solid lubrication is required.

PACKAGING:

MOLYKOTE® M-77 Paste is typically supplied in small tubes (e.g., 100g), 1kg cans, and larger packaging formats depending on regional availability and application needs.

INSTRUCTIONS FOR USE:

• Surface Preparation: Clean and dry all surfaces to remove dust, oxides, oils, old lubricants, and contaminants to ensure optimal adhesion and performance.

• Application: Apply a thin, uniform layer of paste to the target surfaces using a brush, cloth, or suitable applicator. A thin film is sufficient for effective protection.

• Maintenance: Reapply as needed based on wear, operating conditions, and maintenance intervals.

SAFETY AND HANDLING:

MOLYKOTE® M-77 Paste is considered safe when used under normal conditions. Avoid contact with eyes and prolonged skin exposure. Use in a well-ventilated area and follow standard industrial hygiene practices. Refer to the product’s Safety Data Sheet (SDS) for complete safety, handling, and disposal information.

DISCLAIMER:

The information provided is intended for general reference only. Actual product performance may vary depending on materials used, surface preparation, application methods, and specific operating conditions. Users should consult the official technical datasheet and SDS to verify suitability for their specific application.